글쓴이 : 관리자
상품명 : AM7200/95/64

AM7200/95 는 고출력의 Mid/High 2way 시스템입니다.

Mid frequency 는 8 in CMCD Cone Compression Driver 로 구성되었으며,

High frequency 는 3인치 voice-coil 과 1.5인치의 compression driver 로 구성되어 있습니다

수평(H) x 수직(V) 각도는 90° x 50°(60° x 40°)coverage 로서 정사각형의 혼이므로 인위적인 회전이 가능합니다.

High-slope 패시브 네트워크는 band overlap을 최소화 하였으며,

Bi-Amp / Passive 중 선택하여 사용할 수 있습니다.

AE 시리즈의 다른 스피커와 병합하여 사용할 수 있고 , 사각지대인 Down fill 과 서브스피커로 사용합니다.

기본모델은 Black 과 White 의 색상이 있으며

기본방수가 가능한 WRC 모델과 완전방수가 가능한 WRX 모델이 있습니다.


Applications

공연장 , 극장, 강당, 교회, 라이브클럽, 댄스클럽, 스포츠센터, 테마파크 등


상세스펙
Specifications


Frequency Range (-10 dB) 260 Hz - 20 kHz
Frequency Response (±3 dB) 330 Hz - 18 kHz
Coverage Pattern 90° x 50°(60° x 40°), rotatable waveguide
Directivity Factor (Q) 11
Directivity Index (DI) 10.5 dB
Crossover Modes Bi-amp/Passive switchable
Crossover Frequency 2.2 kHz
Transducer Power Rating (AES) MF: 350 W (1400 W peak), 2 hrs

HF: 100 W (400 W peak), 2 hrs
Long-Term System Power Rating(IEC) MF/HF : 200W (800 W peak), 100 hrs
Maximum SPL Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF : 133 dB-SPL cont avg (139 dB peak)

Passive mode:
MF/HF : 133 dB-SPL cont avg (139 dB peak)
System Sensitivity (1W @ 1m) Passive mode: 108 dB SPL
Midrange Driver JBL CMCD-82H Cone Midrange Compression Driver
8 inch Differential driver dual voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m, within operational band) 108 dB SPL

High Frequency Driver JBL 2432H 38mm(1.5 in) compression driver, 75 mm (3 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m) 113 dB SPL
Waveguide PT-K95MH
Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish Black DuraFlex™ finish. White available upon request.
Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in
vertical cabinet orientation) 548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)
Net Weight 27.2 kg (60 lb)
Optional Accessories M10 x 35 mm forged shoulder eyebolts with washer


 
이전제품 AL7115
다음제품 AM7315/95/64