글쓴이 : 관리자
상품명 : AM5212/64/66/95/00/26

AM5212 는 경량이면서 medium power의 2way full-range 시스템입니다.

low frequency 는 12인치의 Differential Drive dual voice coil 이며,

High frequency 는 1.5인치 voice-coil 과 1.5인치의 compression driver 로 구성되어 있습니다.

수평(H) x 수직(V) 각도는 60° x 40°(60° x 60°) (90° x 50°)(100° x 100°)(120° x 60°)coverage 로서 정사각형의 혼으로 인위적인 회전이 가능합니다.

High-slope 패시브 네트워크는 band overlap을 최소화 하였으며,

Bi-Amp / Passive 중 선택하여 사용할 수 있습니다.

기본모델은 Black 과 White 의 색상이 있으며

기본방수가 가능한 WRC 모델과 완전방수가 가능한 WRX 모델이 있습니다.


Applications

공연장 , 극장, 강당, 교회, 라이브클럽, 댄스클럽, 스포츠센터, 테마파크 등




상세스펙
Specifications

Frequency Range (-10 dB) 37 Hz – 20 kHz
Frequency Response (±3 dB) 43 Hz – 18 kHz
Coverage Pattern 60° x 40°(60° x 60°) (90° x 50°)(100° x 100°)(120° x 60°), rotatable waveguide
Directivity Factor (Q) 11.0
Directivity Index (DI) 10.4 dB
Crossover Modes Bi-amp/Passive switchable
Passive Crossover Frequency 1.4 kHz
Transducer Power Rating (AES) LF: 400 W (1600 W peak), 2 hrs
300 W (1200 W peak), 100 hrs
HF: 40 W (160 W peak), 2 hrs
Long-Term System Power Rating(IEC) Passive mode: 300 W (1200 W peak), 100 hrs
Maximum SPL Bi-amp mode:
LF: 122 dB-SPL cont avg (128 dB peak)
HF: 129 dB-SPL cont avg (135 dB peak)
Passive mode:
121 dB-SPL cont avg (127 dB peak)
System Sensitivity (1W @ 1m) Passive mode: 96 dB SPL
Low Frequency Driver 1 x JBL 262H-1 300 mm (12 in ) driver with 50.8 mm (2 in) dual voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m, within operational band) 97 dB SPL

High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m) 113 dB SPL
Waveguide PT-H64HF-1
Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish Black DuraFlex™ finish. White available upon request.
Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector NL4 Neutrik Speakon? and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in
vertical cabinet orientation) 713 x 371 x 458 mm
(28.06 x 14.6 x 18.1 in)
Net Weight 20.2 kg (45 lb)
Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-3


 
이전제품 AM7315/95/64
다음제품 AM5215/64/66/95/26