글쓴이 : 관리자
상품명 : AM5215/64/66/95/26

AM5215 는 경량이면서 medium power의 2way full-range 시스템입니다.

low frequency 는 15인치의 Differential Drive dual voice coil 이며,

High frequency 는 1.5인치 voice-coil 과 1.5인치의 compression driver 로 구성되어 있습니다.

수평(H) x 수직(V) 각도는 60° x 40°(60° x 60°) (90° x 50°)(120° x 60°) coverage 로서 정사각형의 혼으로 인위적인 회전이 가능합니다.

High-slope 패시브 네트워크는 band overlap을 최소화 하였으며,

Bi-Amp / Passive 중 선택하여 사용할 수 있습니다.

기본모델은 Black 과 White 의 색상이 있으며

기본방수가 가능한 WRC 모델과 완전방수가 가능한 WRX 모델이 있습니다.


* Applications

공연장 , 극장, 강당, 교회, 라이브클럽, 댄스클럽, 스포츠센터, 테마파크 등


▶ 상세스펙
Specifications

Frequency Range (-10 dB) 35 Hz - 20 kHz
Frequency Response (±3 dB) 41 Hz - 18 kHz
Coverage Pattern 60° x 40°(60° x 60°) (90° x 50°)(120° x 60°), rotatable waveguide
Directivity Factor (Q) 18.1
Directivity Index (DI) 12.6 dB
Crossover Modes Bi-amp/Passive switchable
Passive Crossover Frequency 1.9 kHz
Transducer Power Rating (AES) LF: 500 W (2000 W peak), 2 hrs
350 W (1400 W peak), 100 hrs
HF: 40 W (160 W peak), 2 hrs
Long-Term System Power Rating(IEC) Passive mode: 350 W (1400 W peak), 100 hrs
Maximum SPL Bi-amp mode:
LF: 125 dB-SPL cont avg (131 dB peak)
HF: 131 dB-SPL cont avg (137 dB peak)
Passive mode:
124 dB-SPL cont avg (130 dB peak)
System Sensitivity (1W @ 1m) Passive mode: 98 dB SPL
Low Frequency Driver 1 x JBL 265H-1 380 mm (15 in) driver with 50.8 mm (2 in) dual voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m, within operational band) 99 dB SPL

High Frequency Driver JBL 2408H-1, 38 mm (1.5 in) exit compression driver, 38 mm (1.5 in) voice coil
Nominal Impedance 8 ohms
Sensitivity (1W @ 1m) 115 dB SPL
Waveguide PT-H64HF-1
Enclosure Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply birch plywood
Suspension Attachment 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish Black DuraFlex™ finish.
White available upon request.
Grille Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector NL4 Neutrik Speakon? and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in
vertical cabinet orientation) 783 x 422 x 504 mm
(30.8 x 16.6 x 19.85 in)
Net Weight 25.0 kg (55 lb)
Optional Accessories M10 x 35 mm forged shoulder eyebolts with washers U-Bracket MTU-1


 
이전제품 AM5212/64/66/95/00/26
다음제품 AM7212/64/66/95/00/26