▶ 제품특성
Control 50 시리즈 Subwoofer-satellite loudspeaker system은 full range 하이파이 사운드를 구현하는

Control 52 Satellite 스피커와 Control 50S/T Subwoofer로 구성되어 있으며 제공되는 브라켓으로 벽면에

설치가 가능한 Surface mount 시스템입니다.

Control 50S/T Subwoofer는 여러 개의 Control 52 Satellite 스피커와 함께 사용이 가능할 뿐만 아니라

매입형 Control 40 시리즈인 Control 40CS/T subwoofer, Control 42 satellite speaker와 같이 사용하여

다양한 어플리케이션에 적용할 수 있습니다.






Features

* Stylish, unobtrusive design fits into a wide variety of decors

* High fidelity sound

* Selectable 70V/100V for distributed lines, or low impedance

* Versatility for either two or four satellite speakers per system

* Ability to mix and match with Control Contractor40 Series inceiling models

* Wall-mount brackets included

* Available in black or white



▶ 상세스펙
SPECIFICATIONS



Frequency Range (-10 dB) 32 Hz – 200 Hz
Frequency Response (±3 dB)
50 Hz – 150 Hz
Power Capacity 300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)

200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity (2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance 8 ohms (in bypass/thru mode)
Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround,
38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
Input Connectors Six removable locking 2-pin connectors with screw-down terminals.
Max wire 12 AWG (2.5 mm2)
Material Top, bottom, front & bottom: Structural plywood.
Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm
(14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight 9.0 kg (20 lbs)
Shipping Weight 10.2 kg (23 lbs)
Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.