글쓴이 : 관리자
상품명 : DPA260A SPEAKER MANAGEMENT

DPA-240A Technical Specifications

Inputs: XLR balanced
Outputs: XLR balanced, TCPIP
Minimum Load: 150ohm
User memories: 24
Recall memories: 24
VU metering: 7 led for Inputs [-20dBu up to +15dBu; Clip]
7 led for Outputs [-20dBu up to +15dBu; Clip; Limit]
Output Leds can be used for displaying the Output
level OR the Limiter activity
THD+N: 0.001% at 1kHz 0dBu
S/N: >110dB
Frequency Response: 20Hz – 20kHz ; -0.5dBu at 20Hz and 20kHz
Spdif input gain(Digital): 0dBu on RCA connector
Process Resolution: Dream SAM3716 DSP,24x32 bit for filtering process;
96 bits resolution on intermediate computation results
Display: Graphic 2x20 characters
Size: 19"X(1U)

DPA-240A Features

Processes: Delay Bell and Shelving filters on Inputs/Outputs,Delay,
HP/LP and RMS Limiter on Outputs
Parametric Equalization: 5 filters on each input assignable as Bell or Shelving
7 filters on each output assignable as Bell or Shelving
Filter type: symmetrical Bell or High/Low Shelving up to second ordr
Filter gain: Bell and Shelving's gain is ranging from -15dBu up to
+15dBu by 0.5dBu resolution steps
Centre frequency: selectable with a 1/24th of octave resolution steps from
20Hz up to 20kHz
Filter Q/BW: Q from 0.05 up to 3 by 0.05 resolution steps
X-Over HPF: from 1st order (Butterworth -6dB/Oct) up to 4th Order
(Butterworth, Linkwitz or Bessel -24dB/Oct)
X-Over LPF: from 1st order (Butterworth -6dB/Oct) up to 4th Order
(Butterworth, Linkwitz or Bessel -24dB/Oct)
Filter's Freq.resolution: 1/24th of octave
Limiter: RMS Limiter
Threshold: from 20dBu up to -10dBu
Attack time: Attack time from 5ms up to 200ms (1ms resolution up to
20ms, then 10ms resolution up to 100ms and 20ms resolution
up to 200ms)
Release time: Release time from 0.1 sec up to 3 sec (0.1sestepscresolution)
Maximum Delay: 848.998ms by 21us increment/decrement

 
이전제품 이전제품 없음
다음제품 다음제품 없음